Cisco 4700M Administration Manual page 235

Chapter 7 Configuring SNMP
Command
Step 3
description text
Example:
host1/Admin(config-cmap-mgmt)# description
Allow SNMP access
no description
Example:
host1/Admin(config-cmap-mgmt)# no
description
Step 4
[ line_number ] match protocol snmp {any |
source-address ip_address mask }
Example:
host1/Admin(config-cmap-mgmt)# match
protocol snmp source-address 192.168.10.1
255.255.255.0
no match protocol snmp
Example:
host1/Admin(config-cmap-mgmt)# no match
protocol snmp
Step 5
do copy running-config startup-config
Example:
host1/Admin(config-cmap-mgmt)# do copy
running-config startup-config
OL-20823-01
Purpose
Provides a brief summary about the Layer 3 and Layer 4 remote
management class map.
The text argument is the description that you want to provide.
Enter an unquoted text string with a maximum of 240
alphanumeric characters.
(Optional) Remove the description from the class map.
Configures the class map to specify that SNMP can be received
by the ACE and an NMS. You configure the associated policy
map to permit SNMP access to the ACE. As part of the network
management access traffic classification, you also specify either
a client source host IP address and subnet mask as the matching
criteria or instruct the ACE to allow any client source address for
the management traffic classification.
The keywords, arguments, and options are as follows:
line_number—(Optional) Line number to identify individual
•
match commands to help you edit or delete them. Enter an
integer from 2 to255. You can enter no line_number to delete
long match commands instead of entering the entire line.
The line numbers do not dictatea priority or sequence for the
match statements.
any—Specifies any client source address for the
•
management traffic classification.
source-address—Specifies a client source host IP address
•
and subnet mask as the network traffic matching criteria. As
part of the classification, the ACE implicitly obtains the
destination IP address from the interface on which you apply
the policy map.
ip_address—Source IP address of the client.
•
mask—Subnet mask of the client in dotted-decimal notation
•
(for example, 255.255.255.0).
(Optional) Deselects the specified SNMP protocol match criteria
from the class map.
(Optional) Copies the running configuration to the startup
configuration.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring SNMP
7-49