Accessing The Ace Dtd File - Cisco 4700M Administration Manual

Configuring the XML Interface

Accessing the ACE DTD File

This section describes how to access the ACE DTD file to perform one of the following tasks:
•
•
The ACE DTD file, ace_appliance.dtd, is included as part of the software image and is accessible from
a web browser using either HTTP or HTTPS.
Details
Perform these steps to access and display the ace_appliance.dtd file:
If you have not done so, create a Layer 3 and Layer 4 class map and policy map to classify the HTTP or
Step 1
HTTPS management traffic that can be received by the ACE. See the
Management Traffic Services"
Open your preferred Internet web browser application, such as Microsoft Internet Explorer or Netscape
Step 2
Navigator.
Access the ace_appliance.dtd file.
Step 3
To directly access the ace_appliance.dtd file, specify the HTTP or secure HTTP (HTTPS) address of your
ACE in the address field, followed by ace_appliance.dtd. For example, enter:
https:// ace_ip_address /ace_appliance.dtd
http:// ace_ip_address /ace_appliance.dtd
You can choose to either open the ace_appliance.dtd file or save it to your computer.
To access the ace_appliance.dtd file from the Cisco ACE Appliance Management page, perform the
following steps:
a.
b.
c.
d.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
8-18
Directly access the ace_appliance.dtd file.
Open the ace_appliance.dtd file from the Cisco ACE Appliance Management page.
Specify the HTTP or secure HTTP (HTTPS) address of your ACE in the address field:
https:// ace_ip_address
http:// ace_ip_address
Click Yes at the prompt to accept (trust) and install the signed certificate from Cisco. To install the
signed certificate, do one of the following:
If you are using Microsoft Internet Explorer, in the Security Alert dialog box, click View
–
Certificate, choose the Install Certificate option, and follow the prompts of the Certificate
Manager Import Wizard.
If you are using Netscape Navigator, in the New Site Certificate dialog box, click Next and
–
follow the prompts of the New Site Certificate Wizard.
Enter your username and password in the fields provided, and then click OK. The Cisco ACE Module
Management page appears.
Click the CISCO ACE DTD 3.0 link under the Resources column of the Cisco ACE Module
Management page to access the ace_appliance.dtd file. You can choose to either open the
ace_appliance.dtd file or save it to your computer.
section.
Chapter 8 Configuring the XML Interface
"Configuring HTTP and HTTPS
OL-20823-01