Configuring A Message-Of-The-Day Banner - Cisco 4700M Administration Manual

Setting Up the ACE
Command
no login timeout
Example:
host1/Admin(config)# no login timeout
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Configuring a Message-of-the-Day Banner

This section describes how to configure a message in configuration mode to display as the
message-of-the-day banner when a user connects to the ACE. Once connected to the ACE, the
message-of-the-day banner appears, followed by the login banner and Exec mode prompt.
Restrictions
If you connect to the ACE by using an SSH version 1 remote access session, the message-of-the-day
banner is not displayed.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
1-14
Purpose
(Optional) Restores the default timeout value of 5 minutes.
(Optional) Copies the running configuration to the startup
configuration.
Chapter 1 Setting Up the ACE
OL-20823-01