Displaying Or Clearing Snmp And Service Policy Statistics; Displaying Snmp And Service Policy Statics; Displaying Snmp Statistical Information - Cisco 4700M Administration Manual

Chapter 7 Configuring SNMP

Displaying or Clearing SNMP and Service Policy Statistics

This section describes how to display or clear SNMP and service policy statistics. It contains the
following topics:
•
•

Displaying SNMP and Service Policy Statics

This section describes the show commands that display configuration and statistical information relating
to your SNMP configuration and associated service policies. It contains the following topics:
•
•

Displaying SNMP Statistical Information

To display SNMP statistics and configured SNMP information, use the following show commands:
Command
show snmp [community | engineID | group | host | sessions
| user]
Table 7-6
OL-20823-01
Displaying SNMP and Service Policy Statics
Clearing SNMP Service Policy Statistics
Displaying SNMP Statistical Information
Displaying SNMP Service Policy Statistics
describes the fields in the show snmp community command output.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying or Clearing SNMP and Service Policy Statistics
Purpose
Displays SNMP statistics and configured SNMP information.
By default, this command displays the ACE contact, ACE
location, packet traffic information, community strings, and
user information. You can instruct the ACE to display specific
SNMP information by including the appropriate keyword.
The keywords are as follows:
community—(Optional) Displays SNMP community
•
strings.
engineID—(Optional) Displays the identification of the
•
local SNMP engine and all remote engines that have been
configured on the ACE.
group—(Optional) Displays the names of groups on the
•
ACE, the security model, the status of the different views,
and the storage type of each group.
host—(Optional) Displays the configured SNMP
•
notification recipient host, User Datagram Protocol (UDP)
port number, user, and security model.
sessions—(Optional) Displays the IP address of the
•
targets for which traps or informs have been sent.
user—(Optional) Displays SNMPv3 user information.
•
7-55