Using the File System on the ACE
Detailed Steps
Command
show keyword [| {begin pattern | count |
end | exclude pattern | include pattern |
last | more}] [> { filename | {disk0:|
volatile}:[ path /][ filename ] |
{ftp: //server/path [ /filename ] |
sftp: // [ username@ ] server/path [ /filename ]
| tftp: //server [ :port ] /path [ /filename ]}
Example:
host1/Admin# show running-config >
ftp://192.168.1.2
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-20
Purpose
Saves a show command output to a file.
The arguments, keywords, and options are as follows:
|—(Optional) Enables an output modifier that filters the command
•
output.
begin pattern—Begins with the line that matches the pattern that you
•
specify.
count—Counts the number of lines in the output.
•
end pattern—Ends with the line that matches the pattern that you
•
specify.
exclude pattern—Excludes the lines that match the pattern that you
•
specify.
include pattern—Includes the lines that match the pattern that you
•
specify.
last—Displays the last few lines of the output.
•
more—Displays one window page at a time.
•
>—(Optional) Enables an output modifier that redirects the command
•
output to a file.
filename—Name of the file that the ACE saves the output to on the
•
volatile: file system.
disk0:—Specifies that the destination is the disk0: file system on the
•
ACE Flash memory.
volatile:—Specifies that the destination is the volatile: file system on
•
the ACE.
[path/][filename]—(Optional) Path and filename to the disk0: or
•
volatile: file system.
ftp://server/path[/filename]—Specifies the FTP network server and,
•
optionally, a filename.
sftp://[username@]server/path[/filename]—Specifies the SFTP
•
network server and, optionally, a filename.
tftp://server[:port]/path[/filename]—Specifies the TFTP network
•
server and, optionally, a filename.
Chapter 4
Managing the ACE Software
OL-20823-01