Chapter 6
Configuring Redundant ACEs
Command
show ft memory [detail]
Displaying Peer Information
To display peer information, perform the following task:
Command
show ft peer peer_id {detail | status |
summary}
Table 6-4
Table 6-4
Field Descriptions for the show ft peer Command Output
Field
Description
Peer ID
Identifier of the remote context in the FT group.
State
Current state of the peer. Possible states are:
FSM_PEER_STATE_INIT—Initial state of the peer after you configure it.
FSM_PEER_STATE_MY_IPADDR—Local ACE IP address is missing. Waiting for the local IP address
to be configured.
FSM_PEER_STATE_PEER_IPADDR—Peer IP address is missing. Waiting for the peer IP address to be
configured.
FSM_PEER_STATE_START_HB—Peer configuration is complete. Starting the heartbeat to see if there
is a peer device.
OL-20823-01
Purpose
Displays redundancy statistics per context.
The optional detail keyword displays detailed HA manager memory statistics in the
Admin context only.
Purpose
Displays redundancy statistics per context.
The keywords and arguments are:
peer_id—Unique identifier of the remote peer
•
detail—Displays detailed peer information
•
status—Displays the current operating status of the peer
•
summary—Displays summary peer information
•
describes the fields in the show ft peer command output.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying or Clearing Redundancy Information
6-33