Setting Up the ACE
Configuring Terminal Settings
This section describes how to access the ACE CLI by using one of the following methods:
•
•
This section contains the following topics:
•
•
For details on configuring remote access to the ACE CLI using SSH or Telnet, see
Remote Access to the
Restrictions
This configuration topic includes the following restrictions:
•
•
Configuring Terminal Display Attributes
This section describes how to specify the number of lines and the width for displaying information on a
terminal during a console session.
Restrictions
The maximum number of displayed screen lines is 511 columns.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
1-24
Make a direct connection by using a dedicated terminal attached to the console port on the front of
the ACE.
Establish a remote connection to the ACE using the Secure Shell (SSH) or Telnet protocols.
Configuring Terminal Display Attributes
Configuring Virtual Terminal Line Settings
ACE.
Only the Admin context is accessible through the console port; all other contexts can be reached
through Telnet or SSH.
The login timeout command setting overrides the terminal session-timeout setting (see the
"Configuring an ACE Inactivity Timeout"
section).
Chapter 1
Setting Up the ACE
Chapter 2, Enabling
OL-20823-01