Chapter 1
Configuring Security Access Control Lists
Displaying ACL Configuration Information and
Statistics
Displaying ACL Configuration Information
Displaying ACL Statistics
OL-16202-01
This section describes the show commands that you can use to display ACL
configurations and statistics. It contains the following topics:
Displaying ACL Configuration Information
•
Displaying ACL Statistics
•
You can display all ACL configuration information, including the interfaces on
which you applied the ACLs by using the show running-config command. The
syntax of this command is as follows:
show running-config
To display only the ACLs and their entries, use the show running-config
access-list command in Exec mode. The syntax of this command is as follows:
show running-config access-list
You can display ACL statistics for a particular ACL by using the show access-list
command. The syntax of this command is as follows:
show access-list name [detail]
The argument and optional keyword are as follows:
name—Identifier of an existing ACL. Enter an unquoted text string with no
•
spaces and a maximum of 64 alphanumeric characters.
detail—(Optional) Displays detailed ACL information, including a 4-byte
•
MD5-hash value that the ACE uses to identify the ACL entry that caused a
deny syslog (106023). See the description of the 0xnnnnnnnn output field in
Table
1-6.
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
Displaying ACL Configuration Information and Statistics
1-43