Displaying The Boot Variable And Configuration Register; Displaying The Software Version - Cisco 4700M Administration Manual

Displaying Software Image Information
•

Displaying the Boot Variable and Configuration Register

To display the boot variable and configuration register, perform the following task from the Admin
context in the Exec mode:
Command
show bootvar
Examples
The following examples shows how to display the boot variable and configuration register:
host1/Admin# show bootvar
BOOT variable = "disk0:c4710ace-mz.A3_1_0.bin"
Configuration register is 0x1
host1/Admin#
The 0x1 indicates that the configuration register is set to 1.

Displaying the Software Version

To display the software image on the ACE, perform the following task:
Command
show version
Examples
The following example includes the command output:
host1/Admin# show version
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2008 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:
system:
6_/auto/adbure_nightly2/nightly_rel_a3_1_0_throttle/REL_3_0_0_A3_0_0
system image file: (nd)/192.168.65.31/scimitar.bin
Device Manager version 1.1 (0) 20080805:0415
installed license: ACE-AP-VIRT-020 ACE-AP-C-1000-LIC
Hardware
cpu info:
Cisco 4700 Series Application Control Engine Appliance Administration Guide
A-12
Displaying the Software Version
Version 0.95
Version A3(1.0) [build 3.0(0)A3(0.0.148) adbuild_03:31:25-2008/08/0
Motherboard:
Appendix A Upgrading or Downgrading Your ACE Software
Purpose
Verifies the boot variable and configuration register.
Purpose
Displays the software image on the ACE.
OL-20823-01