Cisco 4700M Administration Manual page 51

Chapter 1 Setting Up the ACE
Table 1-3 Field Descriptions for the show ntp peers Command
Field
Peer IP Address
Serv/Peer
Table 1-4
Table 1-4 Field Descriptions for show ntp statistics io Command
Field
Time since reset
Receive buffers
Free receive buffers
Used receive buffers
Low water refills
Dropped packets
Ignored packets
Received packets
Packets sent
Packets not sent
Interrupts handled
Received by int
Table 1-5
Table 1-5 Field Descriptions for show ntp statistics local Command
Field
System uptime
Time since reset
Old version packets
New version packets
Unknown version number Number of packets with an unknown NTP version.
Bad packet format
Packets processed
Bad authentication
Table 1-6
OL-20823-01
Description
The IP address of each associated peer
Indicates whether the peer functions as an NTP server or NTP peer
describes the fields in the show ntp statistics io command output.
Description
Time since the last reset of the NTP software on the primary server
Total number of UDP client-receive buffers
Current number of available client-receive buffers
Current number of unavailable client-receive buffers
Total number of times buffers were added, which also indicates the number of times there have been
low memory resources during buffer creation
Total number of NTP packets dropped by the ACE
Total number of NTP packets ignored by the ACE
Total number of NTP packets received by the ACE
Total number of NTP packets transmitted by the ACE
Total number of NTP packets not sent by the ACE due to an error
Total number of NTP timer interrupts handled by the ACE
Total number of pulses received that triggered an interrupt
describes the fields in the show ntp statistics local command output.
Description
Length of time that the ACE has been running.
Time in hours since the ACE was last rebooted.
Number of packets that match the previous NTP version. The version number is in every NTP packet.
Number of packets that match the current NTP version. The version number is in every NTP packet.
Number of NTP packets that were received and dropped by the ACE due to an invalid packet format.
Number of NTP packets received and processed by the ACE.
Number of packets not verified as authentic.
describes the fields in the show ntp statistics memory command output.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying or Clearing the ACE Setup Configuration and Statistics
1-35