Cisco 4700M Administration Manual page 255

Chapter 8 Configuring the XML Interface
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin#(config)#
Step 2
class-map type management [match-all
| match-any] map_name
Example:
host1/Admin(config)# class-map type
management match-all
XML-HTTPS-ALLOW_CLASS
host1/Admin(config-cmap-mgmt)#
no class-map type management
[match-all | match-any] map_name
Example:
host1/Admin(config)# no class-map
type management match-all
XML-HTTPS-ALLOW_CLASS
Step 3
description text
Example:
host1/Admin(config-cmap-mgmt)#
description Allow HTTPS access to
the ACE
no description
Example:
host1/Admin(config-cmap-mgmt)# no
description
OL-20823-01
Purpose
Enters global configuration mode.
Creates a Layer 3 and Layer 4 class map to classify the HTTPor HTTPS
management traffic that can be received by the ACE.
The keyword options and argument are as follows:
match-all | match-any—(Optional) Determines how the ACE
•
evaluates Layer 3 and Layer 4 network traffic when multiple match
criteria exist in a class map. The class map is considered a match if
the match commands meet one of the following conditions:
match-all—(Default) All of the match criteria listed in the
–
class map match the network traffic class in the class map.
match-any—Only one of the match criteria listed in the class
–
map matches the network traffic class in the class map.
map_name—Name assigned to the class map. Enter an unquoted
•
text string with no spaces and a maximum of 64 alphanumeric
characters. The class name is used for both the class map and to
configure a policy for the class in the policy map.
This command enters the class map management configuration mode.
(Optional) Removes a Layer 3 and Layer 4 network management class
map from the ACE.
Provides a brief summary about the Layer 3 and Layer 4 remote
management class map.
The text argument is the description that you want to provide. Enter an
unquoted text string with a maximum of 240 alphanumeric characters.
(Optional) Remove the description from the class map.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring the XML Interface
8-9