Cisco 4700M Administration Manual page 196

Information About SNMP
Table 7-2 SNMP MIB Support (continued)
MIB Support
CISCO-IF-EXTENSION-
MIB
CISCO-IP-PROTOCOL-
FILTER-MIB
CISCO-L4L7MODULE-
REDUNDANCY-MIB
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-10
Capability MIB
CISCO-IF-EXTENSION
-
CAPABILITY
CISCO-IP-PROTOCOL-
FILTER-CAPABILITY
CISCO-L4L7MODULE-
REDUNDANCY-
CAPABILITY
Description
Provides a table that returns ifName to ifIndex mapping to assign the
ifIndex to interfaces.
The CISCO-IF-EXTENSION-MIB is described in RFC 2863.
The Ethernet data port, Ethernet management port, and
Note
port-channel interfaces are available only in Admin
context. In this case, the CISCO-IF-EXTENSION-MIB
supports all the interfaces for Admin contexts, while each
individual user context supports only VLAN and BVI
interfaces.
Manages information to support packet filtering on IP protocols
(RFC 791).
The cippfIpProfileTable allows users to create, delete, and get
information about filter profiles. Filter profiles are uniquely
identified by the profile names. Filter profiles can be either simple
or extended usage types. The cippfIfIpProfileTable applies the
filtering profiles to device interfaces that run IP. A filter profile
can be applied to multiple interfaces.
The cippfIpFilterTable contains ordered lists of IP filters for all
filtering profiles. Filters and profiles are related if they have the
same filter profile name. Filters of the same profile name belong
to a common profile.
The cippfIpFilterHits provides the total number of hit counts for
an access control entry.
The IP protocol is described in RFC 791.
Provides configuration information and statistic tables that reflect
the redundancy (or fault tolerance) between an active and a
standby ACE appliances. Each peer appliance can contain one or
more fault-tolerant (FT) groups.
The CISCO-L4L7MODULE-
REDUNDANCY-MIB provides redundancy information such as:
FT state, IP address, peer FT state, peer IP address, software
compatibility, license compatibility, number of groups to which a
peer belongs, and the number of heartbeat messages transmitted
and received.
The CISCO-L4L7MODULE-
REDUNDANCY-MIB provides details about the fault tolerance
statistics available in the show ft peer, show ft group detail, and
show ft stats command output.
Chapter 7 Configuring SNMP
OL-20823-01