Table of Contents
Advertisement
Hardware Installation
1.
Unpack the Global Modem Kit and retain packing material until installation is validated.
2.
Power off the CPU.
3.
Connect the serial cable from the COM1 port of the CPU to the modem.
4.
Connect the power cord from the modem to the local power outlet.
5.
Connect the telephone cable from the modem to the local communication outlet.
6.
Set the modem power switch to ON.
7.
Power up the CPU
8.
Perform a functional check of the modem according to the application it is designed to be part
of. If the computer is in as-shipped condition, all necessary software should be in place for full
modem functionality.
Only if necessary, perform the VNC (modem remote access software) configuration according
to job card
CNF 005
on
page
107.
Page 87
IST 011 Installing Global Modem
Advertisement
Table of Contents
Troubleshooting
