GE Centricity RA600 Service Manual page 83

Hardware Installation
5. Identify the CPU power supply at the top rear of the chassis. Press the Release tab at the
lower rear corner and rotate it up and away from the system board. The power supply mounting
bracket has detents to hold it up while accessing the system board.
6. Identify RAM module locations (DIMM A thru DIMM D). See
Illustration 3-36:DIMM Module Location on System Board.
7. Mount the additional RAM module(s) into open memory locations. For optimal memory
operation, start from location A (closest to the top edge of the system board) and work
downwards to D, leaving no unoccupied locations between installed modules.
A
B
C
D
Page 83
IST 010 Installing Additional RAM Modules In CPU
Illustration 3-36.