Sw 002 Installing Centricity Ra600 Software - GE Centricity RA600 Service Manual

Software Procedures
n

SW 002 Installing Centricity RA600 Software

Section 1: Introduction
This job card describes how to install the RA600 software on a new workstation hardware platform.
There are several options that may be installed with the RA600 software. Please refer to the
pertinent job cards in this manual or to the RadWorks Technical Reference Manual (FP10123) for
installation instructions.
Section 2: Items Required
u
Centricity RA600 CD-ROM.
u
RA600 license file diskette
Section 3: Prerequisite
u
System must be up and running under Windows 2000 OS.
u
If used, the license file must be available on diskette or where it can be reached by a browser.
u
RA600 license file requires an active network communication. If the network is not available, you
must disable MediaSense before installation. A registry key setting has been provided for
disabling MediaSense. It is in c:\Service\DisableDHCPMediaSense.reg
Refer to Section
Section 4: Procedure
4-2 for specific directions on defining the value assigned to this key.
Page 180
SW 002 Installing Centricity RA600 Software