Saving/Restoring System And User Settings - GE Centricity RA600 Service Manual

Functional Check
n
VF 002

Saving/Restoring System and User Settings

Section 1: Introduction
This job card describes how to start and use the RadWorksSettings tool to manage the RA600
system settings and user profile settings. Only a system administrator may manage the system
settings. Either an administrator or the user may manage the settings for a specific user.
Section 2: Items Required
u
A formatted diskette (only if settings are to be stored offline)
Section 3: Prerequisites
u
Centricity RA600 must be installed and running.OS is loaded.
u
System monitor(s), keyboard and mouse must be functional and monitor(s) powered on.
u
All system and user settings have been completed
Note:
Only the correct drivers will successfully install with a particular video board. Be sure the
correct board installed before proceeding with the following procedure.
Section 4: Procedure
4-1 Start Settings Application
VF 002 Saving/Restoring System and User Settings
Page 165