Hardware Installation
Illustration 3-25:Formatting & Finishing the Created Volume
5.
In the Format Volume window, select the Format this volume as follows radio button and select
the following Formatting parameters:
a.
File system to use: Select NTFS
b.
Allocation unit size: Leave Default
c.
Volume label: New Volume
d.
Check the Perform a Quick Format check box.
e.
Click Next.
6.
In the Completing the Create Volume window, review the volume selections, use the Back
button to make any necessary corrections and then click Finish.
Note the appearance of the new Disk 1 volume in the Computer Management window.
IST 009 Optional Internal Hard Drive Connect & Configure
Page 72