GE Centricity RA600 Service Manual page 202

Software Procedures
a. For the Media Type, select Read Only from the drop down list.
b. For the Device selection, click the Browse button and navigate to the CD write device.
Highlight the device and click OK.
c. For the Total Size field, enter the size of the CD capacity that will be used in the device, e.g.
650 or 700 MB.
d. If you want to add some fles (e.g. cdviewer) check the Copy files checkbox and browse to
the folder where the files are located. Highlight the desired file(s) and click OK on the Browse
dialog box.
e. For the Image directory field, browse the directory where images will be temporarily held
while they are burned onto the CD, highlight that directory and click OK.
f. Check the Verify burned contents checkbox if you want the system to do verify the SMA
CD write process.
g. Check the Delete marked studies after archiving checkbox only if you want to delete the
studies from the RadWorks (RA600) short-term storage after they are written to the SMA CD.
Note:
Additional configuration items are shown in the following graphic.
SW 006 Single Media Archive (SMA) Install, Configure & Test
Page 202