Chapter 8 Disassembly & Reassembly Procedures - GE Centricity RA600 Service Manual

8
Disassembly & Reassembly Procedures
Section 1: Introduction
This chapter contains information on correct settings of the video boards inside the workstation
computer and reference diagrams for rear panel connections to the workstation computer.
The printed circuit boards and hard disk drives contain electronic components that are extremely
sensitive to static electricity. Do not touch the components themselves or any metal part. Wear a
grounding wrist strap when handling the drive assemblies or boards.
For more detailed information on the Dell computer, refer to the Dell Online Documentation, Dell
PowerEdge System Documentation, Dell PowerEdge 1400. The Dell Online Documentation CD is
shipped with each Dell 1400 CPU.
Section 2: Summary of Job Cards
Job Card No.
DR 001
DR 002
DR 003
DR 004
Disassembly/Reassembly Job Cards
Video Board Switch Settings
PC Port Connection Diagram
Replace-Configure PERC 3/DC RAID controller board
Replacement of 221S RAID Unit Components
Page 257