GE Centricity RA600 Service Manual page 229

Software Procedures
Section 4: Procedure
Note:
DO NOT CHANGE THE COMPUTER NAME OF THIS SYSTEM.
By changing the Computer Name, Centricity RA600 Workgroup Server becomes un-
operational.
In any event, if the Computer Name must be changed, the ROC should be notified and the
Registry Keys need to be edited. It is strongly advised that a Windows 2000 server expert
should edit these Registry Keys. If you are not familiar with the Registry Keys setting, please
do not attempt this step otherwise this entire system may become un-operational.
u
Search the Registry Keys and replace all instances of \\RW_WGS\ with the new Computer
Name.
4-1 Installing Workgroup Server on Centricity RA600
Note:
You must install the Workgroup Server before installing any of the Workgroup Clients.
Note:
During the install make sure you create the same default user on the Workgroup Server and all
Clients.
1. Power up the RA600 workstation and, from the Windows 2000 desktop, log in as the
Administrator (need administrator privliges to load software).
2. Install (or reinstall, if applicable) the RA600 software as described in job card
the install wizard asks you to "Choose the Radworks type" be sure to include the Workgroup
server radio button.
3. When you complete the installation wizard, install at least one client per job card
then configure the Workgroup system per job card CNF009.
SW 011 Installing Work Group Server on RA600
Page 229
SW 002. When
SW 012 and