GE Centricity RA600 Service Manual page 113

Software Configuration
11. For the first non-Barco display found, the wizard terms it a "Remaining imaging board head"
and asks if you want to control a display on this head. Click Yes and enter the requested
information about the display connected, then click Next.
12. Follow the wizard's direction until all displays have been found and all requested info entered.
13. When the Define Heads screen appears, follow the on-screen instructions to match the display
with the proper display controller. When the blinking display appears, the goal is to select the
Head of the blinking display and the number of the head shown in a square on the right bottom
of every controller (head).
CNF 006 Monitor Calibration with Barco Tool (MediCal Pro)
Page 113