Honeywell DPR180 Product Manual page 90

SUB-MATRIX
ALARM
Establishes the alarm hysteresis. Alarms switch ON at set point but switch OFF value
DEFINITION:
depends on the hysteresis setting.
Hysteresis is expressed in Engineering units and is added to low alarm and subtracted from
high alarm set points to establish the alarm release value.
Enter a numeric value of up to 3 digits, with optional decimal point.
HOW TO
MODIFY:
[0.0 ... 999] (including decimal point)
POSSIBLE
3 digits after the decimal point available
VALUES
EXAMPLE:
With CHG rate type, this parameter is expressed in Engineering units.
NOTE:
PARAMETER
HYSTERESIS
4. CONFIGURATION
4-36
CLASSIFICATION