Honeywell DPR180 Product Manual page 108

SUB-MATRIX
DIGITAL
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
SEE ALSO:
WARNING:
SUB-MATRIX
DIGITAL
DEFINITION:
POSSIBLE CHOICES:
PARAMETER
MSG TYPE
Defines when the digital message is printed.
Select a new MSG TYPE.
NONE: The standard message (date, time, alarm type ...), and the operator
message are not printed.
STD MESSAGE: The standard message (date, time, alarm type...) is printed
at alarm activation, at alarm release, but operator message is not printed.
MESSAGE ON: Standard operator message is printed when the digital
contact is closed.
MESSAGE OFF: Standard operator message is printed when the digital
contact is opened.
MSG ON/OFF: Standard operator message is printed when the digital contact
is closed and opened.
MESSAGE in MESSAGES sub-matrix
The selection of NONE does not prevent the printing of functional messages
such as, messages of range, speed and group change, these are configurable
by the CHART DOC sub-matrix FUNCT MSG parameters.
In case of many MESSAGES the printing order can be changed.
PARAMETER
TRACE
Enable/disable the digital trace.
ENABLE
DISABLE
4. CONFIGURATION
4-54
CLASSIFICATION
CLASSIFICATION