Honeywell DPR180 Product Manual page 51

SNAP SHOT MATH
START ARCHIVE
REMOVE PCMCIA
Press ENTER and use
3.5.3 RESET display
RESET MATH #
RESET ALL MATHS
RESET OCCURRENCE
RESET ALL OCCUR
RESET PCMCIA
3.5.4 Alarm acknowledgment
Pressing ACK key is only allowed for alarms you have configured in acknowledgment mode.
This acknowledgment is only available
f the lower display shows alternately:
•
REQUEST ACK NOW
and the display type,
- if the ACK key is active.
(See ACK KEY parameter in the MMI sub-matrix)
or to choose the display type.
STOP ARCHIVE
or
Only when PCMCIA option is installed.
Only when MATH OPTION is configured.
Only when PCMCIA option is installed.
3-11
3. OPERATION