Honeywell DPR180 Product Manual page 151

SUB-MATRIX
PERIODIC
REPORT
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
EXAMPLE:
PARAMETER
SYNCHRO AT
Synchronization time of first periodic report and following.
Enter a new value for time.
[0 ... 23] hours
[0 ... 59] minutes
Default value: 00h00
PE01 SYNCHRO AT
00h00
The periodic report will not be printed in "INHIBIT" mode.
The first periodic report will be sent when the nearest time will correspond to
&
[SYNCHRO AT n(PERIOD)] time. (accuracy: 1 second)
"n" is automatically calculated by the recorder so that the synchronization is
effective as fast as possible.
Any configuration modification that stops the acquisitions (with
classification)
or any restart of the recorder will interrupt the current report and will begin a
new one, according to the new parameters.
1) Current time: 13h00
Synchro at: 18h00
Period: 1.50 (1h30)
The first periodic report will be sent at 13h30.
Explanation: 13h30 = 18h00 - 3(1h30)
2) Current date and time: Friday 08/08/1997 at 13h00
Synchro at: 01h00
Period: 168 (1 week)
The first periodic report will be sent on Saturday 09/08/1997, at 01h00.
4. CONFIGURATION
4-97
CLASSIFICATION