Honeywell DPR180 Product Manual page 63

SUB-MATRIX
ANALOG INPUT
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE VALUES:
PARAMETER
RANGE
DISPLAY ACTUATION RANGE
For directly connected temperature sensors and non-linear temperature
transmitters, the actuation selection defines the linearization routine used to
produce a linear chart scale. For linear transmitters, the selection simply
defines the transmitter's range/span.
The choice of actuation offered by the recorder during configuration will
depend upon sensor selected. The ranges allowed will depend on whether
you have selected Thermocouple, Linear or Non Linear or RTD.
Select a new actuation using the
Depends on the type of sensor connected. Possible selections are listed
below.
4-9
4. CONFIGURATION
CLASSIFICATION
or arrows and press ENTER