Honeywell DPR180 Product Manual page 167

4.5.2.2.2 Procedure
Enter in the PRINT mode.
•
SERVICE PRINTER
PR01 PR ALL CONF
Press ENTER to have access to this mode.
Press SET UP to return to RUN mode.
To confirm access in PRINT mode:
•
PR ALL CONF
"CONFIRM" is blinking.
Press ENTER to confirm access in PRINT mode.
Press SET UP to return to the previous level.
During the printing, the following message is displayed:
•
PR ALL CONF
IN PROGRESS
At the end of the printing, the initial message is displayed again:
•
SERVICE PRINTER
PR01 PR ALL CONF
4-113
4. CONFIGURATION