Honeywell DR 4500A Quick Start Manual

Kit Contents
Summary
Procedure
Form 44-45-33-51
DR 4500A Circular Chart Recorder
Kit Instruction
Chart Plate Lockout Kit
(30757301-001)
Form: 44-45-33-51
Effective: 3/04
Supercedes: 8/95
You have received Kit # 30757301-001. Make sure you have received
the following parts:
Part Number
30749121-002
30749601-001
061000001-054
30065164-196
This kit contains parts to add a chart plate lockout feature to your
DR4500A Recorder.
When the parts are installed, you will be able to seal the chart plate by
way of a wire seal. A hole is provided in the mounting bracket and the
locking screw for the chart plate that permits sealing the plate.
Refer to Table 1 for installation instructions and Figure 1 for a Method of
assembly.
Open the recorder door, refer to Figure 1, and follow the procedure in
Table 1 to add the Chart Plate Lockout feature.
Table 1 - Installation Procedure
Step
If present, remove the latch retainer from the chart plate and the
1
captive screw and O. Ring.
2 Drill a hole in the chart plate to accommodate the binding head screw
according to the dimensions shown in Figure 1.
If you assemble the locking plate to the chart plate using the locking
screw, you can use the locking plate as a template to drill the bottom
hole.
Assemble the parts provided in the kit to the chart plate as shown in
3
Figure 1. The bottom hole in the locking plate is threaded to
accommodate the binding head screw.
Place the O. Ring onto the back of the locking screw.
4
Thread a wire through the holes in the locking plate and the locking
5
screw as shown in figure 1.
Quantity
1 Locking Screw
1 Locking Plate
1 Binding Head Screw
1 O Ring
Result or Action
Description
Page 1 of 2