Honeywell DPR180 Product Manual page 225

SUB-MATRIX
PRINTER
DEFINITION:
HOW TO USE/EXECUTE IT:
NOTE:
PARAMETER
100% CHART
Chart certification to show the current 100% chart position with 100% print
carriage. This is a mechanical adjustment.
The message (channel nb) "CAL 100%" is displayed with a flashing
number. This number corresponds to the present adjustment (= step
motor).
To move to the right, increase this number or to the left, decrease the
number. (You may use a negative number).
You can change the distance value by pressing the
The recorder accepts the value by pressing ENTER.
You can leave the 100% chart service by pressing SETUP.
When you press ENTER, the head moves and prints at the new 100%
chart calibration.
8-11
8. SERVICE
CLASSIFICATION
keys.