Honeywell DPR180 Product Manual page 226

SUB-MATRIX
PRINTER
DEFINITION:
HOW TO USE/EXECUTE IT:
PARAMETER
COLOR CALIB
Test to show the current mechanical color adjustment.
Press ENTER to confirm or SETUP to leave.
Description:
- First step gives a rough idea of adjustment, 6 zones from left to right red,
brown, green, purple, blue and black.
- Second step: String of blue characters
- Third step: String of purple characters
- Fourth step: String of green characters
- Fifth step: String of brown characters
Target is to get at least in the four strings: low dash from 0 to 4 in the good
color and up dash from 4 to 0 in the good color.
To increase low dash number in the good color give a positive value by
[
pressing the key quantity proportional to graduations.
To increase up dash number in the good color give a negative value by
]
pressing the key quantity proportional to graduations.
The recorder accepts value by pressing ENTER then the recorder prints
the adjustment test with the new value.
You leave color calibration mode by pressing SETUP.
8-12
8. SERVICE
CLASSIFICATION