Honeywell DPR180 Product Manual page 69

SUB-MATRIX
ANALOG INPUT
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE VALUES:
NOTICE
NOTICE
SUB-MATRIX
ANALOG INPUT
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE VALUES:
NOTICE
NOTICE
PARAMETER
LOW VALUE
Engineering value corresponding to low limit of the selected input
actuation range.
Enter a numeric value.
Up to 4 digits plus optional sign.
[-9999 ... 9999]
Modification is not allowed for any directly connected temperature sensors, as
this would adversely affect the linearization.
Modification is only possible when the sensor is:
- LINEAR or SPECIAL
- RTD and the range is 0, 200 Ohms or 0, 2000 Ohms
For linear and non-linear transmitters choose the value in engineering units,
which corresponds to the low range limit of the transmitter.
PARAMETER
HIGH VALUE
Engineering value corresponding to high limit of the selected input actuation
range.
Enter a numeric value.
Up to 4 digits plus optional sign.
[-9999 ... 9999]
Modification is not allowed for any directly connected temperature sensors, as
this would adversely affect the linearization.
Modification is only possible when the sensor is:
- LINEAR or SPECIAL
- RTD and the range is 0, 200 Ohms or 0, 2000 Ohms
For linear and non-linear transmitters choose the value in engineering units,
which corresponds to the low range limit of the transmitter.
4. CONFIGURATION
4-15
CLASSIFICATION
CLASSIFICATION