Honeywell DPR180 Product Manual page 132

SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SEE ALSO:
SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SEE ALSO:
PARAMETER
HOLD KEY
To enable the Hold key so the operator can modify the display scanning from
the keyboard and hold the upper display on a desired channel.
Choose a new selection.
ENABLE
DISABLE
The possible actions are:
- Scan
- Hold: Stops the scanning of the upper display on the current channel.
Use the keys or
display.
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
PARAMETER
DISPLAY KEY
To enable the display key so the operator can modify the display from the
keyboard.
Choose a new selection.
ENABLE
DISABLE
This key gives access to the different configuration. For each display the
possible indications are the same as the configuration of DISPLAY HI,
DISPLAY LO Parameters.
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
4-78
4. CONFIGURATION
to change the channel number shown on the upper
CLASSIFICATION
CLASSIFICATION