Honeywell DPR180 Product Manual page 67

SUB-MATRIX
ANALOG INPUT
DEFINITION:
HOW TO MODIFY IT:
NOTICE
PARAMETER
EXT COMP
The thermocouple sensor is directly connected to a remote temperature
compensation box. Then the connections are made with copper lead wires.
Two types of wiring are possible:
1) At a fixed temperature compensation box with temperature configurable
o
from 0 up to 80 C (32 to 176
2) On variable temperature compensation box. We use 1 channel to measure
the temperature of the box.
1) Fixed temperature compensation box
2) Variable temperature compensation box
1) Fixed Temperature: Enter a new temperature value in engineering
unit. Choose between VALUE 0 and 80.
2) Variable Temperature: Select the channel used to measure the
temperature of the box.
This parameter is just taken into account if the corresponding channel is
configured with T/C EXT COMP. For T/C INT COMP, RTD and LINEAR, this
parameter has no effect whatever the entered value.
4. CONFIGURATION
o
F).
4-13
CLASSIFICATION