Advertisement
Quick Links
Document Number
Kit Contents
Summary
Form 44-45-33-37B
Models DR4200, DR4300, and
DR4500 Recorders
Replacement Instruction
Chart Motor Kit (30756113-501)
Form: 44-45-33-37B
Effective: 12/98
Supersedes: 3/98
This Chart Motor Replacement Kit contains the following parts:
Description
• Chart Motor
• Chart Hub Kit
• Tie Wraps
• Screws, Plastite #4 x .313
• Screw/Lockwasher #4 x .25
Enclosed is a new chart motor assembly with parts required to replace the
chart motor in a DR4200, DR4300, or DR4500 recorder. Use the
following procedures, as appropriate, to replace the existing chart motor
assembly.
WARNING
Never access components inside the case, or remove or
install any connectors, with power applied.
Quantity
Used On
1
All models
1
All models
4
All models
2
Newer models without
brass inserts
2
Older models with
brass inserts
Continued next page
Page 1 of 3
Advertisement
Related Manuals for Honeywell DR4200
Summary of Contents for Honeywell DR4200
- Page 1 Older models with brass inserts Enclosed is a new chart motor assembly with parts required to replace the Summary chart motor in a DR4200, DR4300, or DR4500 recorder. Use the following procedures, as appropriate, to replace the existing chart motor assembly. WARNING Never access components inside the case, or remove or install any connectors, with power applied.
- Page 2 Follow the procedure in Table 1 to replace the existing chart motor DR4200/DR4300 assembly in your recorder. Procedure Table 1 – Chart Motor Assembly Replacement for DR4200/DR4300 Recorders Step Action Open the chart door and swing the chart plate out. Remove chart hub (front of chart plate) and chart motor (rear of chart plate) by removing screws.
- Page 3 Kit Instruction, continued Refer to Figure 2 for the component locations and Table 2 for the Component Location installation procedure. for DR4500 Chart Spring 24241 Chart Motor Figure 2 – Component Location Follow the procedure in Table 2 to replace the existing chart motor DR4500 Procedure assembly in your recorder.