Operator Initiated Actions - Honeywell DPR180 Product Manual

LOGICAL INPUT STATUS
•
The 2 displays are necessary.
DIXX - - - > Y Y
# # # # # # # # # # # # # # # #
The upper display shows the name of the display type "DI" and the display interval of the lower display.
The lower display shows the digital input status.
"xx" - "yy" takes values from "01 to 16" or "17 to 24".
# = you may have:
contact closed
3.5

OPERATOR INITIATED ACTIONS

3.5.1 Hold display
The HOLD key allows you to stop the scanning action while displaying current value of the selected channel
(upper display only).
The selection of the HOLD key is lost at the power off.
In case of locked displays, see section 3.4.3.3, "LOCK displays".
Then press HOLD key, the HOLD message appears on the upper display during a few seconds. And the
current value is displayed with two lit triangle marks, as shown below:
HOLD
0 1 2 4 5 . 5 UNITS
These two triangle marks allow you to scan the other channels.
NOTE: Some display types do not allow you to use the HOLD key, like DATE/TIME, SPEED.
_
contact opened
.
= missing
3-9
3. OPERATION