Operator Interface; Access To Service; Passwords - Honeywell DPR180 Product Manual

8.1 OPERATOR

ACCESS TO SERVICE

8.1.1
Access to READ/WRITE Configuration, COPY, PRINT CONFiguration or SERVICE from Operation mode is
obtained by pressing the SETUP key.

PASSWORDS

8.1.2
To protect the recorder against unauthorized access, the operator has to enter a password. There are two
possible levels of access :
Password #1 allows reduced access to service. If password #1 is used, you are only able to
•
adjust the 0 % and 100 % chart markings.
Password #2 allows full access to service.
•
NOTE: Use of the
INTERFACE
keys allows you to select SERVICE.
8-2
8. SERVICE