Honeywell DPR180 Product Manual page 82

SUB-MATRIX
CHART
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SEE ALSO:
SUB-MATRIX
CHART
EXAMPLE:
0%
ZONE 1
PARAMETER
0% ZONE
100% ZONE
Defines chart zone for printing.
Enter a new value.
>
0...100% - - - - 0...80% for 0% zone of paper - - - -
zone.
The choice of parameters for 0% and 100% zone allows you to define the
datum such that the width of the chart paper is less than the calibrated
width of the paper.
This function permits the segregation of input traces into zones to avoid
the problem of input signals using the same paper scale and having the
same values printed on top of each other.
The minimum width per zone is 20% of the chart.
The zoning is only possible in TREND mode.
PRINTER matrix and PRINT MODE parameter.
SUB DIV = NO DIVISION when zoning is < 100%
PARAMETER
0% ZONE
100% ZONE
4. CONFIGURATION
CLASSIFICATION
100% ZONE 1
0% ZONE 2
4-28
CLASSIFICATION
>
20...100% for 100%
ZONE 2
100%