Honeywell DPR180 Product Manual page 6

Abstract
This manual describes the installation, configuration, operation, and maintenance of the Recorder.
Warranty
WARRANTY. THE FOLLOWING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE.
a) Goods/Hardware
Except as otherwise hereinafter provided, Honeywell warrants goods of its manufacture to be free of defective materials
and faulty workmanship and as conforming to applicable specifications and/or drawings. Commencing with date of
shipment, Honeywell's warranty shall run for the period specified on the face hereof or, if none be mentioned, 18
months. If warranted goods are returned to Honeywell during this period of coverage, Honeywell will repair or replace
without charge those items it finds defective.
Experimental devices (designated by the letter "X" or "E" within their part-number identification) are prototype, pre-
production items that have yet to complete all phases of product-release testing; these items are sold "AS IS" WITH NO
WARRANTY.
b) Software
Software, if listed on the face hereof and used within hardware and/or a system warranted by Honeywell, will be
furnished on a medium that's free of defect in materials or workmanship under normal use for so long as the hardware
and/or system is under warranty. During this period, Honeywell will replace without charge any such medium it finds
defective. As for the quality or performance of any software or data, they are supplied "AS IS" WITH NO WARRANTY.
c) Services
Where hardware and/or a system is installed by Honeywell, such services are warranted against faulty workmanship for
the same period (if any) as applies to the installed items. During this concurrently running period, Honeywell will correct
without charge any workmanship it finds to be faulty.
Contacts
If you encounter any problem with your recorder, please contact your nearest Sales Office. (See the
address list at the end of this manual).
An engineer will discuss your problem with you. Please have your complete model
number and serial number available. Model number and serial number are located on the
chassis nameplate.
If it is determined that a hardware problem exists, a replacement instrument or part will be shipped
with instructions for returning the defective unit. Do not return your instrument without authorization
from your Sales Office or until the replacement has been received.
World Wide Web: http://www.honeywell.com
Corporate Industrial Measurement and Control:
Telephone: USA & Canada Honeywell: Tech
About This Document
http://www.honeywell.com/imc/
nical Support:
TAC FACS:
Service: 1800
1800-423-9883
1888-423-9883
-525-7439