Honeywell DPR180 Product Manual page 213

7. TROUBLESHOOTING
BAD COLD JUNCTION REFERENCE
Bad reading coming from Cold Junction Reference Resistor
PCMCIA BAD
Some data could not have been stored on PCMCIA card because of a physical problem on it
PCMCIA NOT INIT
PCMCIA card has been recognized but not initialized
PCMCIA PENDING
Data can not be stored on the PCMCIA card because the configuration stored on it does not match the
recorder configuration or there is no memory card
PCMCIA CONF CHG
There is a difference between the configuration of the recorder and the parameters stored in the memory
card, the parameters may be one of the following: the ID number, the language, the trace, the destination,
the tagname and the engineering unit.
PCMCIA DATA LOST
This message is displayed if data written on the PCMCIA card has not been stored and has been removed
from the internal buffer.
PCMCIA FULL
One of the PCMCIA files is nearly full according to the EVENT definition
PCMCIA MISSING
There is no PCMCIA card inside the recorder or the card has not been detected
CARD PRESENT
A PCMCIA card is present with no problem detected
BAD EEPROM BACKPLANE
EEPROM not responding
BAD EEPROM INPUT
EEPROM not responding
7-11