Panel Mounting The Recorder - Honeywell DPR180 Product Manual

2.3

PANEL MOUNTING THE RECORDER

2.3.1 Recommendations
This recorder is designed to operate under specific conditions. If you need more information, refer to the
product specification sheet.
2.3.2 External dimensions and cut-out
Prepare panel cut-out as detailed below:
Note: Maximum panel thickness 40 mm (1.5 '')
CAUTION
!
The maximum temperature inside the cabinet should not exceed the ambient conditions specific for the
recorders. The recorder must be mounted into a panel to limit operator access to the rear terminals.
Failure to comply with these instructions may result in product damage
2-4
2. INSTALLATION