Honeywell DPR180 Product Manual page 134

SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SEE ALSO:
PARAMETER
ACK KEY
To release ALL energized alarms that have ACKNOWLEDGE enabled in
ALARM and DIGITAL sub-matrices.
Choose a new selection.
ENABLE
DISABLE
See sub-matrices:
ALARM, DIGITAL in ACK KEY parameter.
PARAMETER
DISPLAY HI
Type of information displayed on the upper line of the display in the run mode
at power on.
Choose a new selection.
Displayed messages:
ANALOG INPUTS
2 PVS TRACE
MATH RESULTS*
COMM RESULTS
ALARM STATUS
SPEED IN USE
DATE & TIME
TRACE & TAG*
TRACE IN ALARM*
LOGIC STATES*
*This parameter uses both the upper and the lower displays.
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
4. CONFIGURATION
Explanation:
: Display the analog inputs configured
: 2 consecutive channel traces are
displayed on the same display line
: Display maths results
: Display communication channels
: Display alarm states
: Display the chart speed in use
: Display the date and time
: For all traces configured on the
display # 1, display the tag name, and
on the display # 2 the value, the unit
and the alarm associated
: Display the states of alarm associated
for all traced channels
: Display states
4-80
CLASSIFICATION
CLASSIFICATION