Honeywell DPR180 Product Manual page 159

4.4.2.2 Sub-matrix presentation
Each sub-matrix is shown as a table, and each column represents one parameter of the sub-matrix. See
example below relative to the CHART sub-matrix.
CHANNEL TRACE FORMAT
#
A B
Customer
choice
1
2
3
4
24
Each input parameter has a reference containing one letter and one number. (For example, the FORMAT
parameter of the third input has the B03 reference.)
These references are used to identify the source and destination of a copy.
4.4.2.3 Procedure
In COPY mode, select the desired sub-matrix.
•
COPY
CHART
Select the sub-matrix, and Press ENTER
Press SET UP to return to RUN mode.
To confirm the CONFIGURATION mode access
•
COPY CHART
"CONFIRM" is blinking. Press ENTER to enter in CONFIGURATION mode
Press SET UP to return to the previous level.
MIN MAX
RANGE 1 RANGE 1
C D
4-105
4. CONFIGURATION
0% 100%
ZONE ZONE
L M
SUB GROUP
DIV DEF
N O