Honeywell DPR180 Product Manual page 166

To define the high limit number:
•
FROM LINE
The procedure to define this high line number is the same as that for the low line number.
The ENTER key allows you to confirm, check and print your selection.
Press SET UP to return to the previous level.
During the printing, the following message is displayed:
•
PRINT CONF
IN PROGRESS
At the end of the printing, the initial message is displayed again:
•
PRINT CONF
ANALOG INPUT
4.5.2.2 Printing the complete configuration
4.5.2.2.1 Function access
NOTICE:
TO PRINT THE COMPLETE CONFIGURATION, YOU MUST ENTER IN THE SERVICE MODE.
(For more information, see section 8 "SERVICE")
Then to access to the "PRINT ALL CONF" function:
Enter in the SERVICE mode,
•
Select the PRINT matrix.
•
05
4-112
4. CONFIGURATION