Honeywell DPR180 Product Manual page 135

SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
NOTE:
SEE ALSO:
SUB-MATRIX
MMI
DEFINITION:
HOW TO MODIFY IT:
POSSIBLE CHOICES:
PARAMETER
DISPLAY LO
Type of information displayed on the lower line of the display in the run mode
at power on.
Choose a new selection.
Displayed messages:
ANALOG INPUTS
2 PVS TRACE
COMM RESULTS
ALARM STATUS
SPEED IN USE
DATE & TIME
If the selection is the same choice for the 2 displays, displays 1 and 2 are
consecutive.
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
PARAMETER
BRIGHT
To modify the display brightness during operation.
Choose a new selection. Press the key until the display indicates the right
value. Then press ENTER.
OFF (0%)
>> (20%)
MEDIUM (40%)
>> (60%)
>> (80%)
HIGH (100%)
4. CONFIGURATION
Explanation:
: Display the analog inputs configured
: 2 consecutive channels traces are
displayed on the same display line
: Display communication channels
: Display alarm states
: Display of chart speed in use
: Display of date and time
4-81
CLASSIFICATION
CLASSIFICATION