Honeywell DPR180 Product Manual page 161

To define the right limit of the source copy block:
•
COPY CHART
The and keys allow you to change the letter on the first character. The character "O" on the second
display is proposed by default and corresponds to the last column of the sub-matrix. It can be changed
between "B" (chosen at the previous level) and "O".
The ENTER key allows you to confirm your choice and to define the first destination line of the copy.
Press SET UP to return to the previous level.
For example: Choose the "N" letter.
To define the low limit of the destination block:
•
FROM
The and keys allow you to change the first digit or the second one of the line number.
The and keys allow you to move between both digits.
The ENTER key allows you to confirm your choice and to define the second destination line of the copy.
Press SET UP to return to the previous level.
For example: Choose the "03" line.
B01 N01
4-107
4. CONFIGURATION