Honeywell DPR180 Product Manual page 198

Error message
There are unconformities in: line:
Unable to create firmware file
Unable to remove configuration
Unexpected Reset of Device. The
Upgrade Firmware will be aborted
Upgrade failed
Verify that the disk is not protected
and retry the action.
Warning: Configuration corrupted!
5-26
Error Classification
Unconformity
Error during firmware extraction
Error during remove
configuration operation
Firmware upgrade error
Firmware upgrade error
Error during an export operation
Corruption of configuration
5. PC CONFIGURATION
Corrective action
Unconformities between the hardware
options and the configuration being
downloaded.
Close the application and retry.
Provide a non-corrupted database that
contains the configurations and retry the
operation.
The device has reset during the
download. Retry the operation
Upgrade operation was not completed.
The reason for error is displayed prior to
"Upgrade failed" error message.
Ensure that the tab on the floppy disk is
set to a position that allows data to be
written onto the disk and retry the
operation.
Delete the selected configuration file and
recreate the configuration file.