Add User Actuation To Configuration - Honeywell DPR180 Product Manual

5.9.2

Add User actuation to Configuration

To introduce a user actuation file into a recorder configuration, the following dialog box is used. This dialog
box can be accessed by clicking on "Add User Actuation to configuration" menu item in the "User Actuation"
menu
Following are the steps used to introduce the user actuation file into the recorder configuration
1. Select the user actuation number i.e. either "User Actuation #1" or "User Actuation #2"
2. Select the User Actuation file you want to add to your configuration
3. Click on OK to save data and close the window
4. Click on Cancel to abort changes and keep the previous data
5. Click on Edit to display the selected User Actuation data window
5-22
5. PC CONFIGURATION