Setup Menu: Noise Cutoffs - Cisco D9858 Installation And Configuration Manual

Menu Item
Rly
Trp

Setup Menu: Noise Cutoffs

To view the Noise Cutoffs menu from the Main menu, press the RIGHT Arrow key
once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key eight times and the SELECT key to view the Noise Cutoffs menu.
The Noise Cutoffs menu allows you to set the muting thresholds for both audio and
video in the event of a noisy signal. This menu has the following structure:
Noise Cutoff
Trnsprt(DVBS Marg)
Audio(DVBS Marg)
Trnsprt(DVBS2 Marg) Cutoff
Audio(DVBS2 Marg)
Restore Defaults
Yes
Description
If the current alarm or warning
is enabled (Enb is set to Yes),
select whether it will trigger the
rear panel relay when the alarm
is set or cleared.
If the current alarm or warning
is enabled (Enb is set to Yes),
select whether it will send
SNMP trap messages when the
alarm is set or cleared.
Cutoff Restore
i s
0.0 0.1
Cutoff Restore
i s
0.0 0.1
Restore
i s
0.0 0.1
Cutoff Restore
i s
0.0 0.1
Muting Control
i s
Disable
Parameters
Yes or No
Note: No is a read only value that
indicates the setting is Yes, but is
currently being suppressed because
the alarm or warning is disabled (Enb
is set to No).
Yes or No
Note: No is a read only value that
indicates the setting is Yes, but is
currently being suppressed because
the alarm or warning is disabled (Enb
is set to No).
Setup Menu
121