Show Ipv6 Dhcp Guard Policy - Cisco 300 Series Cli Manual

25
571
Example
The following example gives an example of the output of the show ipv6 dhcp
guard command:
switchxxxxxx#
show ipv6 dhcp guard
IPv6 DHCP Guard is enabled on VLANs:1-4,6,7,100-120
Default Preference
minimum: 10
maximum: 100

25.65 show ipv6 dhcp guard policy

To display DHCPv6 guard policies on all ports configured with the DHCPv6 guard
feature, use the show ipv6 dhcp guard policy command in privileged EXEC mode.
Syntax
show ipv6 dhcp guard policy [
Parameters
•
policy-name
—Displays the DHCPv6 guard policy with the given name.
•
active—Displays the attached DHCPv6 guard policies.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays the options configured for the policy on all
guard feature.
DHCPv6
Examples
Example 1—The following example displays the Policy Configuration for a policy
named policy1:
switchxxxxxx#
show ipv6 dhcp guard policy policy1
policy-name
| active]
OL-32830-01 Command Line Interface Reference Guide
IPv6 First Hop Security
s configured with the
port