Configuring Ipv6 Snooping Policy (Cli) - Cisco Catalyst 3850 series Configuration Manual

Configuring Wireless Multicast
Command or Action
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 ipv6 mld snooping
Example:
Device(config)# ipv6 mld snooping

Configuring IPv6 Snooping Policy (CLI)

SUMMARY STEPS
1. enable
2. configure terminal
3. ipv6 snooping policy policy-name
4. security-level guard
5. device-role node
6. protocol {dhcp | ndp}
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
OL-32598-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
Configuring IPv6 Snooping Policy (CLI)
Purpose
• Enter your password if prompted.
Enters global command mode.
Enables MLD snooping.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global command mode.
249